Pel Job EB252 Hydraulic Final Drive Motor

Designation of housing:SP206-207/62N-; G:R1/8"; Weight:2.01 kg; SW:4 mm; T max.:100 °C; H2:41 mm; T min.:-40 °C; L1:225 mm; A5:18.2 mm; A:21 mm;

A:31 mm; C:31.85 kN; Recommended tightening torque for set screw:8 Nm; SW:3.97 mm; Designation of bearing:UC209-27G2T20; A5:30.2 mm; d:42.86 mm; C0:20.8 kN; H:110 mm; G:M6x1;

D1:99 mm; D:110 mm; Fatigue limit load, Cu:22 kN; Characteristic rolling element frequency, BSF:6.17 Hz; Characteristic inner ring frequency, BPFI:10.4 Hz; Y0:2.78; d2:71 mm; d:60 mm; Nref:5,600 rpm; Max operating temperature, Tmax:200 °C;

Bearing ring (outer ring) GS mass:0.49 kg; Cage assembly mass:0.32 kg; Dc1:85 mm; Manufacturer Name:NTN; Nlim (grease):580 rpm; Min operating temperature, Tmin:-20 °C; Category:Bearings; Mass:1.3 kg; d:85 mm; D1:88 mm;

N:13mm; Designation of housing:P204N-; A:38 mm; Dz:54 mm; S:12.7 mm; H1:15 mm; C0:6.65 kN; G:M6x1; s1:15.5 mm; Z:45 mm;

Outside Diameter:6.693 Inch | 170 Mil; Inner Race Width:0 Inch | 0 Millimete; Characteristic inner ring frequency, BPFI:7.91 Hz; Nlim (grease):3,800 rpm; Nlim (oil):4,500 rpm; Other Features:Deep Groove; Product Group:B00308; Inventory:0.0; Dynamic load, C:82 kN; d:110 mm;

S:24.6 mm; Recommended tightening torque for set screw:11.5 Nm; J1:76 mm; L1:94 mm; A1:18 mm; B1:62.7 mm; T max.:100 °C; J:157 mm; G:M6x1; B:49.2 mm;

Bearing Bore Shape:Tapered; Housing Type:4 Bolt Pillow Block; Grease Type:Mobilgrease XHP222; d:2.8750 in; Split Housing:SPLIT; Bearing Series:215 Series; Ship Weight:80 LB; UPC:782475034970; Brand:Baldor-Dodge; Shaft Attachment Type:TYPE C;

Bearing Locking Device:Setscrew; Ball Material:Steel; Manufacturing Plant Location:Rogersville, TN; Bearing Bore Shape:Round; Housing Type:2 Bolt Pillow Block; Bearing Insert Material:Nickel-Coated Steel; Retainer Type:Max Life Cage; Ship Weight:1.59 LB; Seal Type:Triple Lip; UPC:782476254797;

Static load, C0:323 kN; B:36 mm; Min operating temperature, Tmin:-20 °C; r1s min:2.1 mm; r1a max:2 mm; da max:124 mm; E:171.5 mm; Brand:SNR; Nref:3,400 rpm; Characteristic outer ring frequency, BPF0:7.18 Hz;

Adapter sleeve reference:HLK2304; L:127 mm; A1:22 mm; Weight:0.7 kg; Designation of housing:P204N-; Designation of bearing:LK204G2H; H2:65 mm; d1:32 mm; B1:28 mm; N:13mm;

L1:42 mm; d:20 mm; G:M6x1; S:17 mm; Designation of housing:P204-; d1:32.4 mm; T min.:-40 °C; N:13mm; A1:22 mm; H1:15 mm;